The graphic region displays the panel. The check boxes in the layer list control which layers are visible.
See the Product browser chapter for an overview of viewer functionality such as pan and zoom, display modes, mirrored and rotated view, and measurement.
Select and place operations
Select and place operations are done with the left mouse button. The operation performed depends on the current design mode. When no operational mode is selected, selecting any portion of a board contour selects the board (for moving or copying).
Selected boards are highlighted with a white border while they are active (for movement). Once the selected board has been placed, the highlight color changes to yellow.
Rotating boards in a panel
An unselected board may be rotated 180° by pressing the Space key while the mouse pointer is within the board. This operation may be used with boards that may otherwise not be moved or rotated due to panel scoring (v-cut).
Pressing the Space key while one or more boards are selected rotates the selected board(s) by 90°.
Flipping boards in a panel
An unselected board may be flipped upside-down by pressing Shift+Space while the mouse pointer is within the board. This operation may be used with boards that may otherwise not be moved or rotated due to panel scoring (v-cut).
Flipping a board upside-down both mirrors the board and swaps top layers with bottom layers (and corresponding inner layers with each other). This feature is useful for improving copper balance or when creating a panel where the same solder paste stencil is to be used on both sides.
Layers
The layer list displays all layers in the panel. Check boxes are used to specify which layers are visible in the graphic display.
Right-click on the list to show only top layers, show only bottom layers, hide all layers or toggle layer visibility.
Right-click on a layer name to change the display color for that layer. The new color will be used throughout Macaos Enterprise.
The Help tab displays a quick reference for pan/zoom and other graphic viewer commands.