Macaos Gallery 2.x

Build 2.7.2.122 (09-01-2023) 
Fixes: 
- 0005017: [Import] Some objects missing within cutouts in ODB++ polygons
- 0004993: [Panel] Script rout diameter not preserved when creating panel
- 0004971: [Panel] Problem with exported profile if panel has 0mm frame width
- 0004996: [Panel] Problem with combined routing and scoring

Build 2.7.1.121 (03-11-2022) 
Tweaks: 
- 0004970: [Import] Allow flex stackup with stiffener outside of cover layer 
- 0004965: [Test fixture] Extract gbr/dxf file of Test Circuitry PCB from test fixture 
Fixes: 
- 0004987: [Panel] Can not save panel with board as coupon 
- 0004985: [PreCAM ver] Can not save settings if no holiday file is specified

Build 2.7.0.120 (28-07-2022) 
New features: 
- 0004948: [Browser] Simple PCB Editor: Crop all features outside of PCB contour 
- 0004944: [Browser] Simple PCB Editor: Delete selected features 
Tweaks: 
- 0004954: [Browser] New license server and offline option 
Fixes: 
- 0004931: [Panel] Mousebite holes not shown in panel drawing if <0.3mm

Build 2.6.4.117 (27-06-2022) 
New features: 
- 0004808: [Test fixture] Export electronics board outline and hole locations in DXF format 
- 0004851: [EMS ver ADM]: Add additional search text to component search parameters 
Tweaks: 
- 0004915: [Import] Drills pane: Show long drill file names as hint 
- 0004912: [Import] Drill map file should not be autolinked to Drill 
- 0004903: [Import] Add '@' to supported characters in text font 
- 0004911: [Test fixture] Increase max active area for MIT fixture 
- 0004874: [EMS ver ADM]: Add Autolink to Octopart icon 
- 0004870: [EMS ver ADM] Add unit price to Component pricing estimator 
- 0004878: [PreCAM ver Price Editor] Several usability tweaks 
- 0004877: [PreCAM ver Price Editor] Allow moving price elements up/down within price section 
Fixes: 
- 0004885: [Browser] AV if no file selected 
- 0004875: [Browser] Oval pads incorrectly drawn in PDF layer drawing 
- 0004901: [Import] Parser report warnings should not show for solder mask files 
- 0004905: [MIF] Text output generates invalid Gerber arcs 
- 0004902: [Panel] Datamatrix is missing the bottom line of the finder pattern 
- 0004879: [Price] Price element not applied under certain circumstances 
- 0004930: [Stencil] Round option on frame selection fails 
- 0004916: [Stencil] Creating Stencil from 247973 causes some of the 45deg. pads to vanish 
- 0004917: [Test fixture] Dimensions not restored after local save 
- 0004884: [Test fixture] Test pin continuation list incorrectly printed 
- 0004887: [EMS ver ADM] "µ" is incorrectly imported from BOM to ADM 
- 0004880: [PreCAM ver Price Editor] Price element not applied if apply parameter is list type and apply method is param in list

Build 2.6.3.116 (03-03-2022) 
Tweaks: 
- 0004842: [Import] The on publish check list is partly missing the first letter 
- 0004853: [EMS ver ADM] Add Ctrl+D shortcut to search in Octopart search dialog 
- 0004852: [EMS ver ADM] Auto search when opening Octopart search if manufacturer and MPN specified 
- 0004849: [EMS ver ADM] Update product specs when closing ADM 
- 0004848: [EMS ver ADM] In Octopart search, check for manuf. name should not be case sensitive 
- 0004846: [EMS ver ADM] Layer visibility when showing instances 
- 0004844: [EMS ver ADM] Select component if exact match in Filter function 
- 0004840: [EMS ver ADM] Change Save button to OK in component editor 
Fixes: 
- 0004857: [Import] Stackup info missing after loading .mei file 
- 0004843: [Import] AV when importing .mei file 
- 0004861: [Panel] On publish, the product's panel and stackup drawings get corrupted 
- 0004864: [Stencil] Cannot split opening to array larger than 2x2 
- 0004797: [Stencil] Bug in edit shapes height/width 
- 0004850: [EMS ver ADM] When importing BOM, the original file does not get saved with the product 
- 0004841: [EMS ver ADM] If a space is found in Designator line - ADM will keep asking you if you want to use it as separator 
- 0004856: [EMS ver Test fixture] Location and diameter data for test pins incorrect when temporarily saving 
- 0004836: [EMS ver Test fixture] List index out of bounds error when deleting pin

Build 2.6.2.115 (31-01-2022) 
Fixes: 
- 0004834: [Browser] Content of boards is missing from PDF drawings of panelized product

Build 2.6.2.114 (27-01-2022) 
Tweaks: 
- 0004830: [Browser] It should be possible to delete export profiles 
- 0004802: [Panel] Barcode and Datamatrix on legend should not have inverted colors 
- 0003902: [Panel] Changes to panel drawing 
- 0004823: [EMS ver ADM] Add designators to components report, and MPN to placement report 
Fixes: 
- 0004832: [Import] Some 0-layer stackups do not display properly in stackup chooser 
- 0004824: [Import] If copper top is unlinked, it can still be selected as active layer in Outline 
- 0004822: [Import] List index out of bounds (0) when using ctrl+select in Outline 
- 0004817: [Import] Slot in drill file is rotated incorrectly 
- 0004810: [Import] inserting data matrix code sometimes gives range check error 
- 0004807: [Import] Importing separate bottom PnP file adds components to top 
- 0004806: [Import] Can not link more than one user layer when importing ODB++ 
- 0004794: [Import] Misleading error message if outline primitive has too few vertices 
- 0004791: [Import] MIsleading error message when importing ODB++ files: no plated holes specified 
- 0004803: [Panel] Datamatrix is not placed according to the moving rectangle 
- 0004814: [EMS ver ADM] Missing columns in BOM components and placement reports 
- 0004831: [EMS ver Test fixture] Panel instances not offset properly

Build 2.6.1.113 (04-10-2021) 
Tweaks: 
- 0004784: [Viewer] Show info on x-key snap placement 
- 0004787: [EMS ver ADM] Select component in search dialog without changing search texts 
- 0004786: [EMS ver ADM] Button to expand only component level in component list 
Fixes: 
- 0004785: [Import] Range check error when selecting 10-layer stackup 
- 0004783: [Import] Test pads bottom layer not saved if IPC file not automatically recognized 
- 0004782: [EMS ver ADM] Component layer is visible but the visibility checkbox is not checked 
- 0004781: [EMS ver ADM] Designator filter does not work 
- 0004788: [Pro Version Price Editor] Unknown property error in price element edit dialog

Build 2.6.0.112 (28-09-2021) 
New functionality: 
- 0004736: [Import] Support for IPC-D-356 test pad data 
- 0003817: [Stencil] Modify stencil openings by footprint (using IPC-D-356 data) 
- 0004780: [EMS ver ADM] BOM Import: Exclude components from Equiv or better by designator 
- 0004748: [EMS ver ADM] Mark individual instances with "alert" 
- 0004747: [EMS ver ADM] Ctrl+Alt+Click on component in viewer to locate it component list 
- 0004735: [EMS ver ADM] Extract key pin and outline data from IPC-D-356 test pad data 
- 0003501: [EMS ver Test fixture] Extract signal name, designator and pin number from IPC-D-356 test pad data 
Tweaks: 
- 0004734: [Import] Add menu item to change entire drill file between plated/unplated 
- 0004755: [EMS ver ADM] Add Battery component class 
- 0004751: [EMS ver ADM] Change MPN of selected instance 
- 0004749: [EMS ver ADM] Make PnP import dialog sizable 
- 0004746: [EMS ver ADM] Add buttons to zoom/highlight selected instance or all instances 
- 0004745: [EMS ver ADM] Make it possible to copy original description text 
- 0004744: [EMS ver ADM] Component search: Check boxes for selecting MPN and alternates 
- 0004777: [EMS ver Test fixture] Delete pin from pin list 
- 0004753: [EMS ver Test fixture] Improved documentation set for test fixture 
Fixes: 
- 0004750: [Browser] "Product not found" error message when viewing global products 
- 0004740: [Browser] Dormant products should not be displayed after making product dormant 
- 0004737: [Browser] Component layers should be included in documentation set 
- 0004769: [Import] Altium fixed-width PnP file in mils scaling error 
- 0004757: [Import] Text for blind bottom file depth is too large for grid column 
- 0004756: [Import] Can not place adhesive layer in custom stackup 
- 0004754: [Import] Integer overflow on autocontour 
- 0004738: [Import] Orig diameter is displayed incorrectly in tool list 
- 0004728: [Import] Min annular ring shows incorrectly if no plated holes 
- 0004766: [EMS ver ADM] Can not import BOM from file stored in product 
- 0004752: [EMS ver ADM] Add new component does not place precisely 
- 0004739: [EMS ver ADM] Problem deleting component outline 
- 0004776: [EMS ver Test fixture] Cancel pin creation does not exit properly 
- 0004774: [EMS ver Test fixture] Integer overflow when calculating centroid for large qty of pins

Build 2.5.1.110 (14-07-2021) 
New functionality: 
- 0004727: [EMS ver ADM] Add text search for all cells in BOM view 
Tweaks: 
- 0004721: [Import] Check for castellated holes after rescaling drill 
- 0004722: [EMS ver Test fixture] Allow larger active area for integrated jig 
- 0004712: [EMS ver Test fixture] Add product number to name of STEP file on publish 
Fixes: 
- 0004726: [Import] Zero-length arcs when importing ODB++ data 
- 0004725: [Stencil] Display issue with help texts 
- 0004718: [Viewer] 3D files for integrated test jigs are shown with wrong color 
- 0004711: [EMS ver ADM] Hide modes ignored when refreshing component tree 
- 0004716: [EMS ver Test fixture] Integrated test jig test circuitry support pin location issues

Build 2.5.0.109 (16-06-2021) 
New functionality: 
- 0004685: [EMS ver Test fixture] Support for Integrated Test Jig fixture 
- 0004589: [EMS ver Test fixture] Extract test point locations from Component layer 
Tweaks: 
- 0004705: [Panel] Reduce minimum bar code height to 5.0mm 
- 0004454: [Stencil] Highlight aperture(s) that give minimum aspect/area ratio 
- 0004694: [EMS ver ADM] BOM Import: Automatically identify designator separator if comma, semicolon or space found 
- 0004693: [EMS ver ADM] BOM Import: Add additional Value columns 
- 0004692: [EMS ver ADM] BOM Import: Allow hyphen as valid designator character 
- 0004691: [EMS ver ADM] BOM Import: Allow marking caps/res as equivalent or better 
- 0004690: [EMS ver ADM] BOM Import: Clear all settings 
- 0004689: [EMS ver ADM] BOM Import: Search and replace in selected grid column 
- 0004683: [EMS ver ADM] Delete equiv or better, or all alternates 
- 0004679: [EMS ver ADM] It should be possible to un-mark a checked item from the popup menu 
- 0004677: [EMS ver ADM] Component search module short cut changed from Ctrl+O to Ctrl+D 
- 0004699: [EMS ver Test fixture] Add option to upload 3D (step) file for PCB. 
- 0004668: [EMS ver Test fixture] Add pressed mass center location on fixture publish 
Fixes: 
- 0004706: [Browser] Test fixture board center incorrectly displayed 
- 0004703: [Import] Bevel definition crashes in certain situations 
- 0004700: [Import] Countersink holes cause via filling to be true 
- 0004696: [Import] Depth controlled routing does not get saved properly 
- 0004687: [Import] Recognizer identifies csv file as Gerber file 
- 0004682: [Import] Extra drill tool imported, though not in drill file 
- 0004707: [Stencil] Generic stencils generated with wrong size 
- 0004701: [Stencil] Not possible to set positive adjustment (reduction) value 
- 0004680: [Stencil] Newly created stencil frames will not be shown 
- 0004695: [EMS ver ADM] Some changes not saved when product saved 
- 0004688: [EMS ver ADM] Problem importing PnP from attached file 
- 0004678: [EMS ver ADM] Imported file stored in product is empty 
- 0004676: [EMS ver ADM] Hide components with BOM status approved does not work. 
- 0004675: [EMS ver ADM] Focus issue in component list

Build 2.4.5.108 (06-05-2021) 
Tweaks: 
- 0004673: [Import] Disable custom material for thermal dielectric layers 
- 0004661: [Import] Allow slot widths >= 0.25mm for depth routing 
- 0004666: [EMS ver ADM] Add menu commands to expand/collapse selected item in list 
- 0004665: [EMS ver ADM] More options to hide components in list 
- 0004664: [EMS ver ADM] Allow designator ranges (C13-C25) in search 
- 0004662: [EMS ver ADM] Caption and icon changes to reduce confusion about approval and placement style 
Fixes: 
- 0004670: [Import] Integer overflow when displaying arc with very large radius 
- 0004671: [Panel] Outer dimension controls do not work as expected with scoring 
- 0004667: [EMS ver ADM] Unidentified "parts not found" 
- 0004663: [EMS ver ADM] Access violation importing PnP bottom data

Build 2.4.4.107 (12-04-2021) 
Tweaks: 
- 0004653: [Import] Allow depth routing with diameter up to 10mm 
- 0004651: [EMS ver ADM] Enable Swap Layer only when instance is selected 
- 0004643: [EMS ver ADM] Give unique description when creating component 
- 0004533: [EMS ver ADM] Allow import of XLSX and ODS files for BOM 
Fixes: 
- 0004644: [Browser] Export profiles do not get saved properly 
- 0004652: [Import] Via plugging assigned to wrong tool 
- 0004646: [Import] Problem importing Gerber As Drill file with cutouts 
- 0004641: [Import] Drill tool plating gets ignored even though defined in file header comment 
- 0004654: [Stencil] Problem editing stencil 
- 0004645: [Stencil] Frame text does not get deleted from stencil 
- 0004649: [EMS ver ADM] Keyboard arrow button does not work in Edit boxes in edit component

Build 2.4.3.106 (24-03-2021) 
Tweaks: 
- 0004634: [EMS ver ADM] EMS: Function to automatically link to Octopart (if possible) 
- 0004628: [EMS ver ADM] Add separate functions to mark as approved for Placement/BOM 
- 0004626: [EMS ver ADM] Clear all components 
Fixes: 
- 0004637: [Import] Problems editing tool diameters 
- 0004631: [Panel] Can not rotate board if scoring is enabled 
- 0004627: [EMS ver ADM] Component counts not saved properly 
- 0004625: [EMS ver ADM] Some rotations are incorrect when importing PnP from Altium

Build 2.4.2.105 (11-03-2021) 
Tweaks: 
- 0004618: [EMS ver ADM] Components with FB designators should be Inductors 
Fixes: 
- 0004615: [Import] Integer overflow on import 
- 0004622: [Panel] Slots disappear when editing existing panel 
- 0004620: [Panel] Can not set frame width less than 3mm 
- 0004619: [EMS ver Pallet] Integer overflow when generating rout files for pallet

Build 2.4.1.104 (03-03-2021) 
Tweaks: 
- 0004603: [EMS ver ADM] Add "save settings" check box to Import BOM dialog 
- 0004602: [EMS ver ADM] Check that description and/or manuf part # column is specified 
Fixes: 
- 0004599: [Import] ODB++ issue with certain symbol pads 
- 0004608: [Panel] Problems with shortcut keys 
- 0004600: [Panel] Out of range error when opening panel module 
- 0004604: [EMS ver ADM] Shortcut keys to view layers not working 
- 0004601: [EMS ver ADM] Error importing BOM in text/csv format

Build 2.4.0.103 (23-02-2021) 
New functionality: 
- 0004448: [Import] Allow marking drill tools as countersink 
- 0004453: [Import] Add conformal coating top/bottom layers 
- 0004441: [Panel] Panel scripts with fixed panel size 
- 0004156: [Panel] Add board as test coupon 
- 0004130: [Panel] Scripts with only frame objects 
- 0004127: [Panel] Disable board rotation in script 
- 0002840: [Panel] Add text object to scripts 
Tweaks: 
- 0004556: [Import] If zip contains both Gerber and ODB++ data, ask which to use 
- 0004307: [Import] Increase data resolution from 100 nm to 1 nm 
- 0004440: [Panel] Add notch to panel edge 
- 0004562: [Panel] Add diamond and octagon as fiducial shapes 
- 0004173: [Panel] Warn when no room to place IPC-2221 Z coupon 
- 0004565: [Viewer] Show angle in measurement display 
- 0004591: [EMS ver ADM] Add Test point as component class 
- 0004577: [EMS ver ADM] Option to ignore DNP components in price estimator 
- 0004566: [EMS ver ADM] Approved component counts based on Approved for BOM 
- 0004563: [EMS ver ADM] Add Fuse and Crystal component classes 
Fixes: 
- 0004412: [Browser] Circuit data stackup interpretation problems 
- 0004570: [Import] Hard gold area calculated wrong 
- 0004561: [Import] Slot drill in Gerber As Drill file not imported correctly 
- 0004555: [Import] Error in ODB++ parser 
- 0004552: [Import] Cannot re-link unlinked GerberAsDrill file 
- 0004010: [Import] Can't select all contour objects in one go 
- 0004553: [Other] Stackup drawing scale is wrong in some cases 
- 0004568: [Panel] Access violation when placing IPC-2221 Z coupon

Build 2.3.5.101 (17-12-2020) 
Fixes: 
- 0004549: [Browser] Exporting slot drill to XNC causes endless loop

Build 2.3.4.100 (11-12-2020) 
Tweaks: 
- 0004540: [ADM] Several tweaks and fixes 
- 0004535: [Import] Can not read Gerber files which lack I or J value 
Fixes: 
- 0004545: [Browser] Drill files exported as Gerber when XNC requested 
- 0004546: [Browser] Mixed drill layer not split to separate plated/unplated files on export 
- 0004539: [Import] DXF import - polyline "bulge" arcs become straight lines

Build 2.3.3.99 (19-11-2020) 
New functionality: 
- 0004437: [ADM] Mounting type column in BOM import 
- 0004462: [Import] Limited import of dxf 
Tweaks: 
- 0004516: [ADM] BOM fields and sorting during import BOM in ADM 
- 0004480: [ADM] User experience tweaks 
- 0004438: [ADM] Multiple Supplier/SKU columns in imported BOM 
Fixes: 
- 0004532: [Browser] File extensions missing on export using Macaos File Name profile 
- 0004522: [ADM] Problem importing PnP with missing values 
- 0004529: [ADM] Choose fiducial mounting style

Build 2.3.2.98 (11-11-2020) 
Fixes: 
- 0004530: [Browser] Can not export stencil product to Gerber 
- 0004526: [MIF] DNP component property not saved to MIF file 
- 0004523: [Panel] Copper fill is displayed incorrectly 
- 0004528: [Pro Version Quote] Price breakdown does not display correctly after editing price

Build 2.3.1.96 (28-10-2020) 
Fixes: 
- 0004518: [Browser] The Profile Gerber file does not get exported 
- 0004520: [Import] Problem reading Gerber files with format spec but without apertures 
- 0004515: [Import] Parsing should not fail if comma but no rotation parameter in circle primitive 
- 0004500: [Import] Warning of empty file when last set is empty 
- 0004497: [Test fixture] Cannot edit a saved test fixture with flipped board 
- 0004512: [Viewer] Polygons not drawn correctly

Build 2.3.0.95 (21-10-2020) 
Fixes: 
- 0000000: [Pro version] Unable to fetch quotation template

Build 2.3.0.94 (19-10-2020) 
New functionality: 
- 0004451: [ADM] New Assembly Data Manager module 
- 0004266: [Browser] Single-board product editor module 
- 0004450: [Import] Support for all features of current version of Gerber Format (2020.09 with X3 extensions) 
- 0003943: [Stencil] Add Aspect and area ratio calculations 
Tweaks: 
- 0004157: [Browser] Improve behaviour when license is expired 
- 0004510: [Import] Statistics display improperly before outer contour is defined 
- 0004421: [Import] It should be possible to create inner contour objects from polygons 
- 0003847: [Import] Warn of unsupported G41/G42 compensation when importing excellon file 
- 0004432: [Other] Show toolbar button captions below icons 
- 0004471: [Panel] Allow to create panels with flex boards defined with laser outline 
- 0004376: [Panel] Do checks allow saving before the save dlg is shown 
Fixes: 
- 0004416: [Import] Cannot parse Gerber obround flash as slot 
- 0004413: [Import] Issues with Gerber Job import from kicad 
- 0004405: [Import] Warn about unspecified tool dias prior to laser cutter warning 
- 0004445: [Stencil] Program hangs on Rotate Frame if view is rotated 
- 0004390: [Stencil] Run-time error when reducing butterfly openings

Build 2.2.2.93 (18-12-2019) 
Fixes: 
- 0004382: [Depanel] Duplicate tab removal segments in some cases 
- 0004387: [Import] PnP layer does not get published 
- 0004385: [Import] MEI files saved to local disc can't be imported again 
- 0004365: [Import] Depth routing issues 
- 0004364: [Import] ODB++ Plated slot tools show as unplated in drill tool list 
- 0004380: [Panel] Copper fill cut-out mis-placed after rout width change

Build 2.2.1.92 (11-12-2019) 
Fixes: 
- 0004386: [Browser] Some files not exported if only one drill file format selected

Build 2.2.0.91 (10-12-2019) 
New functionality: 
- 0003236: [Assy Data] Improve PnP import options 
- 0004384: [Browser] It should be possible to enter network paths in config dialog 
- 0004321: [Browser] Select drill file format and extra files on export 
- 0004315: [Browser] User definable PnP output format 
- 0004360: [Import] Support for backdrill layers 
- 0004318: [Import] Allow user to specify PnP file format if unrecognized 
- 0004230: [Import] Mark holes as press-fit 
- 0004229: [Import] Laser outer/inner cutter for flex boards 
- 0003909: [Pallet] Pallet designer module for solder pallets 
- 0004323: [Pro Version Price Editor] Support for multiple shipment methods 
- 0004372: [Stencil] Add function to transfer tooling holes from panel to stencil 
- 0004128: [Stencil] Generic stencil frame should have rounded corners 
- 0004212: [Test fixture] PCB as test fixture 
Tweaks: 
- 0004337: [Browser] Update CircuitData to version 2 
- 0004331: [Depanel] Change suction cup holder for 4, 6 and 8 mm cups 
- 0004300: [Depanel] Do not allow pedestals to overlap 
- 0004283: [Depanel] Improved auto-detection of tabs 
- 0004322: [Import] GerberJob updated to support rev 2019.09 
- 0004275: [Import] Display board size before showing automatic contour message 
- 0004373: [Pro Version Quote] Add sellers ref no. to quotation 
- 0004371: [Stencil] Allow stencil frames/products without any text and smaller text size 
- 0002219: [Stencil] Duplicate stencil opening modifications to all boards in panel 
Fixes: 
- 0004377: [Browser] Product list filter ignores subfolders 
- 0004368: [Browser] Can not change file extension for inner layers in export profile 
- 0004343: [Import] Cannot link file if incorrectly linked to Drill 
- 0004341: [Import] Set legend color to White when creating layer for symbol 
- 0004316: [Import] Access violation in link filter manager 
- 0004290: [Import] Some mech products get zero volume after import 
- 0004288: [Import] Access violation importing Gerber as Drill file with polygon regions 
- 0004285: [Import] Error message when loading CircuitData materials database 
- 0004378: [Panel] Inserting a reg. control coupon, causes DB error 
- 0004353: [Panel] Problem adding new board to existing panel 
- 0004303: [Panel] Rout compensation can give undesired results in some cases 
- 0004301: [Panel] A 4-layer board gets wrong buried drill layer name after flip 
- 0004292: [Panel] Rout width does not always change properly when user selects another rout width 
- 0004369: [Stencil] Stencil issues 
- 0004347: [Stencil] Generic frame was unselected 
- 0004334: [Viewer] Copper thickness is sometimes shown wrong for special stackups

Build 2.1.8.90 (23-08-2019) 
Fixes: 
- 0004302: [Panel] Break-off tabs do not show properly in panel drawing 
- 0004308: [Pro Version Price Editor] Access violation when changing price in Price Wizard grid

Build 2.1.7.89 (18-06-2019) 
Fixes: 
- 0004274: [Browser] Plated through drill layer not exported

Build 2.1.7.88 (12-06-2019) 
Tweaks: 
- 0004272: [Test fixture] Timer on max/min check for fixture size should be lengthened 
Fixes: 
- 0004273: [Panel] Soldermask disappears from panel frame

Build 2.1.6.87 (07-06-2019) 
New functionality: 
- 0004268: [Panel] Allow editing solder mask as an assembly mask 
- 0004251: [Panel] Remove solder mask from around break-off tabs 
Tweaks: 
- 0004271: [Browser] When exporting to Gerber, split plated/unplated through drill layer Gerber files 
- 0004265: [Depanel] Allow for offset between reg holes and milling program 
- 0004112: [Depanel] Generation of 3D IGES file for depanel fixture 
- 0004267: [Panel] Allow milling track to cross scoring line into waste matl 
Fixes: 
- 0004270: [Browser] Incorrect file function in exported unplated XNC file 
- 0004269: [Import] "import board product specs" should ignore qty board per panel

Build 2.1.5.86 (21-05-2019) 
New functionality: 
- 0004248: [Browser] It should be possible to export PTH and NPTH in separate files 
- 0004249: [Panel] Allow milling track to cross scoring line on board corners 
Tweaks: 
- 0004234: [Assy Data] Add note that PnP must include fiducials 
- 0004250: [Browser] Exported Excellon files should be XNC compliant 
- 0004261: [Depanel] Make it possible to not have a dust nozzle 
Fixes: 
- 0004260: [Import] Allegro PnP file not scaled properly 
- 0004258: [Import] Problems with depth routing in ODB++ 
- 0004245: [Panel] Problems with v-cut when editing panel 
- 0004262: [Test fixture] Can not place test pins on flipped board

Build 2.1.4.85 (25-04-2019) 
Fixes: 
- 0004239: [Import] Text file viewer does not size correctly 
- 0004246: [Panel] Panel property controls hidden when opening Actions menu 
- 0004236: [Panel] Out of bounds error when creating remark

Build 2.1.3.84 (11-04-2019) 
New functionality: 
- 0003802: [Import] Import board specs from CircuitData 
Tweaks: 
- 0004186: [Depanel] Warn if fixture is too near rout table edge 
- 0004053: [Import] Some flex import tweaks 
- 0004040: [Import] Add minimum feature functions to view mode menu 
- 0004221: [Panel] Allow changing rout width 
- 0004224: [Viewer] Show flex layers slightly wider in rigid-flex stackup 
- 0004167: [Viewer] Add minimum feature functions to view mode menu 
Fixes: 
- 0004215: [Depanel] Alignment holes missing from NC file for depanel fixture product 
- 0004217: [Import] Can not add adhesive layer beside cover layer 
- 0004207: [Import] Stackup drawing in PDF does not draw thin/flex boards properly 
- 0004203: [Import] Can not deselect contour segments 
- 0004231: [Pro Version Price Editor] AV when opening "empty" price list in wizard 
- 0004211: [Test fixture] Fixture sizes can not be adjusted 
- 0004202: [Test fixture] Misleading message when opening test fixture designer

Build 2.1.2.83 (01-04-2019) 
Fixes: 
- 0004218: [Browser] AV when opening assy data mgr 
- 0004211: [Test fixture] Fixture sizes can not be adjusted

Build 2.1.1.82 (13-02-2019) 
Tweaks: 
- 0004181: [Import] Set color None for flex board with cover layer and no solder mask 
- 0004175: [Import] Gerber macro vector line uses depracated specification 
- 0004166: [Import] Board size not displayed after autocontour 
Fixes: 
- 0004183: [Stencil] Scripts are not activated when loading data from files

Build 2.1.0.81 (01-02-2019) 
New functionality: 
- 0004172: [Browser] Export CircuitData file of product 
- 0004168: [Browser] File history 
- 0003993: [Panel] Add impedance test coupon to panel frame 
- 0004169: [Pro Version Quote] Import RFQ from Macaos Enterprise 
- 0004152: [Pro Version Quote] Disable price list 
- 0003803: [Pro Version Quote] Import product specs for quotation from CircuitData or Gerber Job file 
Tweaks: 
- 0004076: [Import] Support for additional PnP formats 
- 0004153: [Pro Version Quote] Cannot specify blind/buried when free specs 
Fixes: 
- 0004165: [Import] Capped and Tented Via's in ODB++ are incorrect 
- 0004161: [Import] Selected stackup disappears when placing UL mark

Build 2.0.2.80 (17-12-2018) 
Tweaks: 
- 0004139: [Browser] Improved explanation of various outline files in ProductInfo.txt 
- 0004129: [Browser] Expanded support for export profiles 
- 0004144: [Import] Selected inner contour not shown 
- 0004142: [Stencil] Add possiblity to scale and change size of features when moving features to paste layer 
- 0004113: [Stencil] Add tooling holes to stencil 
Fixes: 
- 0004147: [Import] Solder mask is set to green for both sides of a single sided board 
- 0004146: [Import] Rotated oval pads with holes are not exported with rotation 
- 0004133: [Import] Problem recognizing drill file containing multiple files 
- 0004126: [Import] Warn if number of linked files does not match selected number of layers 
- 0004137: [Stencil] Shape splitter window can't open

Build 2.0.1.79 (21-11-2018) 
Tweaks: 
- 0004121: [Test fixture] Width of USB connector is wrong 
Fixes: 
- 0004118: [Browser] Filenames in gbrjob file are wrong 
- 0004106: [Depanel] Some arc tabs have wrong arc direction 
- 0004102: [Depanel] Position of nozzles are wrong at startup 
- 0004125: [Import] Outer contour gets wrong tool size on autocontour 
- 0004120: [Import] ODB++ imports some user shapes with wrong dimensions 
- 0004119: [Import] Can not select 4-layer stackup 
- 0004103: [Import] Most layers missing from product published from ODB++ 
- 0004124: [Panel] Rotated boards not displayed correctly rotatated or mirrored view 
- 0004123: [Stencil] Selected fiducials not exported 
- 0004115: [Stencil] Can not deselect visible layers in viewer 
- 0004114: [Stencil] Problems with transfer objects

Build 2.0.0.78 (12-11-2018) 
New functionality: 
- 0004100: [Browser] Include GbrJob file when exporting to Gerber 
- 0004062: [Browser] Support for subfolder management 
- 0004066: [Depanel] Depanelization module 
- 0003915: [Import] Allow defining "missing" layer in custom stackup 
- 0003971: [Panel] Specify panel outer dimensions 
- 0003631: [Panel] Allow placing tooling holes/fiducials relative to panel center 
- 0004064: [Pro Version Quote] Enable price inspector in Quote dialog 
- 0003978: [Viewer] Show minimum copper to unplated edge clearance in viewer 
- 0003982: [Other] Use more consistent look/feel across all modules 
- 0003979: [Other] Expanded connection manager 
Tweaks: 
- 0004020: [Import] Highlight selected contour object 
- 0003960: [Import] Show Symbols layer when showing top/bottom layers 
- 0004067: [Panel] Allow selecting bad marks for only boards or only panel in autopanel 
- 0004007: [Panel] Instance spacing should not be reset when changing instance count 
- 0003989: [Stencil] Automatically convert simple polygons to flash pads 
- 0004087: [Viewer] Show cover layer for flex boards 
Fixes: 
- 0004033: [Browser] Problem with long filenames when exporting to Gerber 
- 0004085: [Import] Zero-length drawn pads should not be ignored 
- 0004031: [Import] Stackup sets the flex / rigid-flex style incorrectly 
- 0004021: [Import] Primitives in Gerber macros are rotated around the wrong origin 
- 0003985: [Import] Inner layers not listed in correct order 
- 0003959: [Import] EP mark and UL mark does not seem to get saved 
- 0004006: [Panel] Panel believes straight edge is round and makes circular outline 
- 0003996: [Panel] Panel report does not support fiducials with cross shape 
- 0004104: [Pro Version Price Editor] Grid data disappears from price wizard 
- 0004065: [Pro Version Quote] Price lists may not have unique ID numbers